MAX379EWG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 3.5kOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX379 |
| Pin Count | 24 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Turn On Delay Time | 1 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX379EWG Overview
Packed in 24-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. 24 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electrical component is included in the 24 series of products. A SP4T switching circuit is used for these analog switches. Circuits number 2 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX379. This digital multiplexer has 3.5kOhm internal resistance. Analogue multiplexers of the Dual supply type that are cost-effective. It would be sufficient to run this analogue multiplexer with 1mA current. If put voltage greater than 18V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 4.5V should be attached. The electronic component can function from 15V.
MAX379EWG Features
4 Channels
Switch Circuit: SP4T
1mA Supply Current
MAX379EWG Applications
There are a lot of Maxim Integrated MAX379EWG Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Routers
- CSU
- Precision instrumentation
- Cable PC
- HDTV
- Industrial control systems
- E1 Network Equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Video switching
