MAX379MJE/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 750ns, 500ns |
| Switch-on Time-Max | 750ns |
| Switch-off Time-Max | 500ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX379MJE/883B Overview
Presented in 16-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, 16 terminations have occurred. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. Based on SP4T switching circuits, these analog multiplexers work. Circuits number 2 make up this analogue multiplexer. This digital multiplexer has 3Ohm internal resistance. Despite this switch's dual supply capability, its voltage should not exceed 18V. With dual power supplies, you should attach at least 4.5V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
MAX379MJE/883B Features
4 Channels
Switch Circuit: SP4T
MAX379MJE/883B Applications
There are a lot of Maxim Integrated MAX379MJE/883B Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- Ultrasound
- Precision instrumentation
- Channelized and Unchannelized DS3 applications
- Medical
- Public switching systems
- Remote wireless modules
- Microprocessor controlled systems
- Low-Voltage
- Fiber In The Loop (FITL)
