MAX382CPN

150ns, 150ns 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX382 18 Pins 200pA 5V 18-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX382CPN
Package: 18-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 955
Description: 150ns, 150ns 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX382 18 Pins 200pA 5V 18-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	18-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	18
ECCN Code	EAR99
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	889mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	MAX382
Pin Count	18
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Power Supplies	3/5/+-5V
Number of Channels	8
Number of Circuits	1
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	1μA
Propagation Delay	275 ns
Turn On Delay Time	500 ns
Voltage - Supply, Single/Dual (±)	2.7V~16.5V ±3V~8V
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	400 ns
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	11pF 40pF
On-state Resistance Match-Nom	4Ohm
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	4 Ω (Max)
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height Seated (Max)	4.572mm
Length	22.86mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant

MAX382CPN Overview

This electronic part is conveniently packaged in 18-DIP (0.300, 7.62mm), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Through Hole. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around 0°C~70°C TA. In total, 18 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 18 series of products. It consists of 1 circuits. Try searching with MAX382 if you're looking for variants. The internal resistance of this digital multiplexer is 100Ohm. Theswitch device is a typical Multiplexer or Switches. The switch device would be able to operate with 1μA current. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages of 12V are compatible with the electrical part.