MAX383CSE

175ns, 100ns SPDT 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX383 16 Pins 200pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX383CSE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 648
Description: 175ns, 100ns SPDT 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX383 16 Pins 200pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	35Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	2
Supply Voltage	5V
Base Part Number	MAX383
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	8V
Power Supplies	+-5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Nominal Supply Current	1μA
Max Supply Current	1μA
Number of Bits	8
Turn On Delay Time	150 ns
Voltage - Supply, Single/Dual (±)	3V~15V ±3V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	400 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 100ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	175ns
Switch-off Time-Max	100ns
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX383CSE Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. The operating temperature is extended to around 0°C~70°C TA. A total of 16 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SPDT switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with MAX383 if you are looking for variants. Internally, this switch multiplexer has a resistance of 35Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16V. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.7V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. If you are using a dual power supply, you should attach at least 3V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical part can be operated at 8V voltage levels. 8-bit conductivity is possible.