MAX384CWN+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Type | Multiplexer |
| Resistance | 375Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Voltage - Supply | ±3V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX384 |
| Pin Count | 18 |
| JESD-30 Code | R-PDSO-G18 |
| Operating Supply Voltage | 12V |
| Circuit | 4 x 1:1 |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Operating Supply Current | 1μA |
| Propagation Delay | 275 ns |
| Turn On Delay Time | 500 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 2.4V |
| Off-state Isolation-Nom | 75 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 4Ohm |
| Independent Circuits | 2 |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 11.55mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX384CWN+T Overview
This is a relatively small item of digital switch that is included in the 18-SOIC (0.295, 7.50mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.When the operating temperature is kept at 0°C~70°C, the machine will not be sensturn signal switchive to external influences.Using a ±3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.As parts of its basic configuration, 18 terminations are desgined.The base part number is MAX384, which is also useful when looking up signal switch's related components.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 18 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply Dual that is employed in this case.It is positioned in the direction of Surface Mount.For mux switch's normal operation, there is a power supply provided at 3/5/+-5V.With a supply voltage of 12V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 375Ohm.For transmission, there are 4 channels in the turn signal switch's circuit.It is possible to maintain stability of the multiplexers if the supply voltage to the load is set at 1μA.
MAX384CWN+T Features
Supplied in the 18-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
Power supplies of 3/5/+-5V
Operating with the supply voltage of 12V
Operating with the supply current of 1μA
MAX384CWN+T Applications
There are a lot of Maxim Integrated MAX384CWN+T Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Paper plants
- Time division multiplexing system
- Enabling block of memory depending on address in memory chips
- Make half adder
- Memory system of computers
- Implementing boolean functions with multiple variables
- Memory chips
- Code converters
- Microprocessor input/output systems
