MAX385CPE+
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX385 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 175ns, 100ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 150ns |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
MAX385CPE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature around 0°C~70°C TA extended. The total number of terminations is 16. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using DPST - NO switching circuits. There are 2 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MAX385.
MAX385CPE+ Features
2 Channels
Switch Circuit: DPST - NO
MAX385CPE+ Applications
There are a lot of Maxim Integrated MAX385CPE+ Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Audio signal routing
- SDH/SONET multiplexers
- Industrial
- Mechanical reed relay replacement
- Microprocessor controlled systems
- Cable Modem
- Microwave transmission systems
- Audio and video switching
- Public switching systems
