MAX388CPN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 3kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | FAULT PROTECTED; OVERVOLTAGE PROTECTION |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX388 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 2mA |
| Number of Bits | 8 |
| Throw Configuration | SP8T |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Supply Current-Max (Isup) | 2.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 300Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 300 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX388CPN+ Overview
Packed in 18-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Through Hole position. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 18. By its 8 channels, the electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. There are 18 pins injected into the electronic part body. Circuits number 1 make up this analogue multiplexer. Search with MAX388 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 3kOhm. For details about the functions of 18 pins, please refer to the datasheets. The digital multiplexer has a low cost Dual supply. 2mA current would be enough for this multiplexer to operate. There is no problem with using dual supply voltage, but it should not exceed 18V. With dual power supplies, you should attach at least 4.5V. Operating voltages range from 15V. Don't miss this electronic component's additional features, such as: FAULT PROTECTED; OVERVOLTAGE PROTECTION. It can conduct in a 8-bit manner.
MAX388CPN+ Features
8 Channels
2mA Supply Current
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
8-Bit
MAX388CPN+ Applications
There are a lot of Maxim Integrated MAX388CPN+ Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Audio/video switches
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Industrial control systems
- Medical Instrumentation
- FTTH
- Audio and video signal routing
- Microwave transmission systems
- ATM
