Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Resistance |
3kOhm |
Max Power Dissipation |
941mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Base Part Number |
MAX388 |
Pin Count |
24 |
JESD-30 Code |
R-PDSO-G24 |
Operating Supply Voltage |
15V |
Number of Channels |
8 |
Number of Circuits |
1 |
Operating Supply Current |
2mA |
Propagation Delay |
1 μs |
Turn On Delay Time |
1.5 μs |
Logic Function |
Multiplexer |
Supply Type |
Dual |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
1 μs |
Max Dual Supply Voltage |
18V |
On-State Resistance (Max) |
3kOhm |
Min Dual Supply Voltage |
4.5V |
High Level Output Current |
20mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
5pF 25pF |
On-state Resistance Match-Nom |
300Ohm |
Switch Time (Ton, Toff) (Max) |
1.5μs, 1μs |
Charge Injection |
55pC |
Channel-to-Channel Matching (ΔRon) |
300 Ω |
Voltage - Supply, Dual (V±) |
±4.5V~18V |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX388CWG+T Overview
Shipping overseas is convenient with the electronic component packed in 24-SOIC (0.295, 7.50mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 24. This electronic part offers high-quality output due to its 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. It is injected into the electrical part body with 24 pins. There are 1 circuits in this multiplexer. Try searching with MAX388 if you're looking for variants. In this multiplexer, the internal resistance is 3kOhm. Dual supply type digital switch with a low cost. In order to operate this switch device, it would need a current of 2mA. There is no problem with using dual supply voltage, but it should not exceed 18V. In the case of dual power supplies, you should connect at least 4.5V. A voltage of 15V can be used to operate the electronic component.
MAX388CWG+T Features
8 Channels
2mA Supply Current
MAX388CWG+T Applications
There are a lot of Maxim Integrated MAX388CWG+T Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- CSU
- HDTV
- PDAs
- Avionics test equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cell phones
- Digital access cross connects
- Digital Cross-Connects
- Audio and video routing