MAX388EPN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 3kOhm |
| Additional Feature | FAULT PROTECTED; OVERVOLTAGE PROTECTION |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX388 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 2mA |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Supply Current-Max (Isup) | 2.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 300Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 300 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 4.572mm |
| Length | 22.86mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX388EPN Overview
The electronic component is convenient to ship overseas because it is packed in a 18-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 8:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 18. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component like this is included in the 18 series. The multiplexer consists of 1 circuits. Try searching with MAX388 if you're looking for variants. As far as internal resistance is concerned, it has 3kOhm. For details about the functions of 18 pins, please refer to the datasheets. Analog switch ics with Dual supply type are cost-effective. This digital switch can be operated with a current of 2mA. Despite this switch's dual supply capability, its voltage should not exceed 18V. In the case of dual power supplies, you should connect at least 4.5V. The electronic component can function from 15V. You shouldn't miss the additional features of the electrical component, such as: FAULT PROTECTED; OVERVOLTAGE PROTECTION.
MAX388EPN Features
8 Channels
2mA Supply Current
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
MAX388EPN Applications
There are a lot of Maxim Integrated MAX388EPN Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Relay Replacement
- Data switching
- Medical Instrumentation
- SONET
- Intelligent PBX
- High reliability control systems
- Relay replacements
- Power routing
- Avionics and Military Systems
