MAX389EPN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 3kOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | FAULT PROTECTED; OVERVOLTAGE PROTECTION |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX389 |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 2mA |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 300Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 300 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1ns |
| Switch-off Time-Max | 1ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX389EPN Overview
The electrical component comes in 18-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 18. A 4 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. This electronic part can be found in the 18 series. Multiplexers built on a SP4T switching circuit are built. 2 circuits are used in this analogue multiplexer. Use MAX389 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 3kOhm. For functions related to 18 pins, please refer to the datasheets. The analog switch ic is of the Dual supply type and is cost-effective. This digital switch can be operated with a current of 2mA. For this switch, a dual supply voltage is feasible, but it must not exceed 18VWhen using dual power supplies, you should attach at least 4.5V. This electrical part is compatible with 15V operating voltages. Additional features include: FAULT PROTECTED; OVERVOLTAGE PROTECTION.
MAX389EPN Features
4 Channels
Switch Circuit: SP4T
2mA Supply Current
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
MAX389EPN Applications
There are a lot of Maxim Integrated MAX389EPN Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Cell phones
- Central office
- Multi-Line E1 Interface Cards
- Mechanical reed relay replacement
- Low-Voltage
- Switching Systems
- Remote wireless modules
- Microwave transmission systems
- PCMCIA cards
