MAX389EWG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 3kOhm |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 941mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX389 |
| Pin Count | 24 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 2mA |
| Propagation Delay | 1 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 300Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 55pC |
| Channel-to-Channel Matching (ΔRon) | 300 Ω |
| Switch-on Time-Max | 1ns |
| Switch-off Time-Max | 1ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX389EWG+T Overview
Packed in 24-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 24 terminations. This electronic part offers high-quality output due to its 4 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 24 series. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 2 circuits. Using the MAX389 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 3kOhm. The analog switch ic is of the Dual supply type and is cost-effective. In order to operate this switch device, it would need a current of 2mA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. The voltage should be at least 4.5V if you are using dual power supplies. The electrical part can be operated at 15V voltage levels.
MAX389EWG+T Features
4 Channels
Switch Circuit: SP4T
2mA Supply Current
MAX389EWG+T Applications
There are a lot of Maxim Integrated MAX389EWG+T Analog Switches & Multiplexers ICs applications.
- CSU
- Cable Modem
- Digital cross connects (DSX-1)
- Relay replacements
- Industrial control systems
- Remote wireless modules
- PDH Multiplexers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Battery-powered systems
- Isolation
