MAX394CAP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX394 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 66 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 130ns, 75ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -88dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 130ns |
| Switch-off Time-Max | 75ns |
| Height Seated (Max) | 1.99mm |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | Non-RoHS Compliant |
MAX394CAP Overview
Packed in 20-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. A total of 20 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. As part of its design, the 20 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 4 circuits in this multiplexer. MAX394 can be used to search for analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
MAX394CAP Features
1 Channels
Switch Circuit: SPDT
MAX394CAP Applications
There are a lot of Maxim Integrated MAX394CAP Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Optical Applications
- FTTH
- ISDN NT1/TA
- Battery-powered systems
- Communication systems
- Avionics
- Voice over IP/DSL – Integrated Access Devices, Smart
- ATM
- Industrial
