MAX394EWP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX394 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 66 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 130ns, 75ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -88dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 130ns |
| Switch-off Time-Max | 75ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MAX394EWP+ Overview
The electronic component is convenient to ship overseas because it is packed in a 20-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. In total, 20 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. 20 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPDT switching circuits. 4 circuits are used in this analogue multiplexer. Use MAX394 to search for variants of the digital switches. The datasheets for the 20 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
MAX394EWP+ Features
1 Channels
Switch Circuit: SPDT
MAX394EWP+ Applications
There are a lot of Maxim Integrated MAX394EWP+ Analog Switches & Multiplexers ICs applications.
- Public switching systems
- ISDN NT1/TA
- Audio and video routing
- Cable PC
- DVD-R
- Remote Powered Equipment
- Relay Replacement
- Cellular phones
- PBXs
- Audio and video switching
