MAX395EWG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX395 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.03mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 400ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 400ns |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MAX395EWG+ Overview
Packed in 24-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. In total, there are 24 terminations. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. It is injected into the electrical part body with 24 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. It consists of 8 circuits. MAX395 can be used to search for analog multiplexer variants. To find out what the 24 pins do, please refer to the datasheets.
MAX395EWG+ Features
1 Channels
Switch Circuit: SPST - NO
MAX395EWG+ Applications
There are a lot of Maxim Integrated MAX395EWG+ Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- FTTH
- Video switching
- Video signal routing
- Channelized and Unchannelized DS3 applications
- DSUs
- Precision data acquisition
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- SDH/SONET multiplexers
