MAX396CAI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX396 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 60nA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Height | 1.78mm |
| Length | 10.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX396CAI+ Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SSOP (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 28. High-quality output is provided by the electronic component's 16 channels. With a 5V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 28 pins. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MAX396. It has an internal resistance of 100Ohm. To find out what the 28 pins do, please refer to the datasheets. A voltage higher than 16V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2.7V is the lowest voltage the electrical component should receive. 60nA current would be enough for this multiplexer to operate. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. In the case of dual power supplies, you should connect at least 3V. This electrical part is compatible with 15V operating voltages.
MAX396CAI+ Features
16 Channels
60nA Supply Current
MAX396CAI+ Applications
There are a lot of Maxim Integrated MAX396CAI+ Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Data switching
- Microwave transmission systems
- Avionics and Military Systems
- Audio signal routing
- RGB switches
- Cross Connects
- Multiplexers
- SONET
- Optical Applications
