MAX396CPI
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| JESD-30 Code | R-PDIP-T28 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 200ns |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| RoHS Status | Non-RoHS Compliant |
MAX396CPI Overview
Packed in 28-DIP (0.600, 15.24mm), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Increasing operating temperature to around 0°C~70°C TA. There are 28 terminations totally. A electrical component with 16 channels is capable of high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. A key feature of the 28 series is the inclusion of this electronic part as part of its design. There are 1 circuits in this switch device. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.
MAX396CPI Features
16 Channels
MAX396CPI Applications
There are a lot of Rochester Electronics, LLC MAX396CPI Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- High-Voltage
- T1/E1 Terminals
- Modems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- DVD-R
- Multiplexers
- 65 V DACs
- Relay replacements
- Wireless Local Loop
