MAX396CWI+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX396 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 60nA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX396CWI+T Overview
This electronic part is conveniently packaged in 28-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 16:1 is the number of circuits in the multiplexer and demultiplexer. Around 0°C~70°C TA is the extended operating temperature. Totally, there are 28 terminations. The electronic part delivers high-quality output through its 16 channels. A 5V voltage supply should turn on and run the electronic component. As part of its design, the 28 series is equipped with this electronic component. A 1 circuit is present in this switch device. Use MAX396 to search for variants of the digital switches. In this multiplexer, the internal resistance is 100Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 16V. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 2.7V should be applied to the electronic component. For this multiplexer to operate, 60nA current would be sufficient. Despite this switch device's dual supply capability, its voltage should not exceed 8V. For dual power supplies, a voltage of at least 3V should be attached. A voltage of 15V can be used to operate the electronic component.
MAX396CWI+T Features
16 Channels
60nA Supply Current
MAX396CWI+T Applications
There are a lot of Maxim Integrated MAX396CWI+T Analog Switches & Multiplexers ICs applications.
- Data switching
- FTTH
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Industrial
- Microprocessor Controlled Analog Systems
- Audio and video routing
- Medical
- PBX interfaces
- DVD-R
- Microwave transmission systems
