MAX396EPI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX396 |
| Pin Count | 28 |
| JESD-30 Code | R-PDIP-T28 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 200ns |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| RoHS Status | ROHS3 Compliant |
MAX396EPI+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-DIP (0.600, 15.24mm). High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Through Hole. There is 16:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 28 terminations. This electronic part offers high-quality output due to its 16 channels. An 5V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 28 pins. The circuits in this analogue multiplexer number 1. Try searching with MAX396 to find analog multiplexer variants. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
MAX396EPI+ Features
16 Channels
MAX396EPI+ Applications
There are a lot of Maxim Integrated MAX396EPI+ Analog Switches & Multiplexers ICs applications.
- Public switching systems
- T1/E1 Terminals
- Cable PC
- Avionics test equipment
- E1 Multiplexer
- Cross Connects
- PDH Multiplexers
- Automotive applications
- Battery Powered Systems
- Sample-and-hold systems
