MAX396EPI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | TIN LEAD |
| Max Power Dissipation | 1.143W |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX396 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX396EPI Overview
As the electronic part is packed in 28-DIP (0.600, 15.24mm), international shipping is convenient. High reliability is ensured by the advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 16:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 28. Due to its 16 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. A key feature of the 28 series is the inclusion of this electronic part as part of its design. It consists of 1 circuits. If you are looking for variants of the digital switch, trying search with MAX396. This digital multiplexer has 100Ohm internal resistance. For functions related to 28 pins, please refer to the datasheets. Users shouldn't supply more than 16V voltage to the switch device. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. This digital switch can be operated with a current of 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. For dual power supplies, a voltage of at least 3V should be attached. Operating voltages of 15V are compatible with the electrical part.
MAX396EPI Features
16 Channels
1μA Supply Current
MAX396EPI Applications
There are a lot of Maxim Integrated MAX396EPI Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Multiplexers
- Cell phones
- Cable Modem
- Communication systems
- Avionics
- Automatic test equipment
- Routers
- Voice over IP/DSL – Integrated Access Devices, Smart
- Frame Relay Equipment
