MAX396EWI+T
| Parameters | |
|---|---|
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX396 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 8V |
MAX396EWI+T Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SOIC (0.295, 7.50mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 16:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 28 terminations. A electrical component with 16 channels is capable of high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. A total of 28 pins are injected into the body of the electronic part. A 1 circuit is present in this switch device. Use MAX396 to search for variants of the digital switches. In this multiplexer, the internal resistance is 100Ohm. Please refer to the datasheets for 28 pins functions. Users should never supply a voltage higher than 16V to a switch device. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage the electrical component should receive. For this digital switch to work, 1μA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 8V. If you are using a dual power supply, you should attach at least 3V. There is a voltage range of 15V operating voltages for the electrical part.
MAX396EWI+T Features
16 Channels
1μA Supply Current
MAX396EWI+T Applications
There are a lot of Maxim Integrated MAX396EWI+T Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Industrial and process control systems
- Access Concentrators
- Mechanical reed relay replacement
- Transmit
- Sample hold systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Microprocessor Controlled Analog Systems
- DSLAMs
- Digital Cross-Connects
