MAX397CWI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX397 |
| Pin Count | 28 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX397CWI Overview
This electronic part is conveniently packaged in 28-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around 0°C~70°C TA. A total of 28 terminations have been recorded. A high-quality output is provided by the electrical component's 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 28 pins. The circuits in this analogue multiplexer number 2. Use MAX397 to search for variants of the digital switches. Analog switches have 100Ohm internal resistance. For functions related to 28 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 16V voltage to the switch device. 2.7V should be the lowest voltage fed to the electronic component. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. For dual power supplies, a voltage of at least 3V should be attached. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
MAX397CWI Features
8 Channels
MAX397CWI Applications
There are a lot of Maxim Integrated MAX397CWI Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Central office
- Intelligent PBX
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Isolation
- Digital access cross connects
- HDTV
- High reliability control systems
- Mechanical reed relay replacement
- High-Voltage
