MAX398CSE+G55
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 225Ohm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX398 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1μA |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 9.9mm |
| Width | 3.9mm |
MAX398CSE+G55 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. In total, there have been 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. Circuits number 1 make up this analogue multiplexer. Try searching for MAX398 variants of the analog switch ic. This digital multiplexer has 225Ohm internal resistance. Multiplexers should not be powered above 15V in normal situations. The digital multiplexer has a low cost Dual, Single supply. 3V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 1μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. When using dual power supplies, you should attach at least 3V.
MAX398CSE+G55 Features
8 Channels
1μA Supply Current
MAX398CSE+G55 Applications
There are a lot of Maxim Integrated MAX398CSE+G55 Analog Switches & Multiplexers ICs applications.
- Modems
- Video switching
- Automotive applications
- ISDN NT1/TA
- PCMCIA cards
- Public switching systems
- Cable Modem
- High-Voltage
- Audio signal routing
- Fiber to the Home
