MAX399CEE+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Additional Feature | ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX399 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-8/3/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.75mm |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX399CEE+ Overview
Presented in 16-SSOP (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 4:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Look for analog switch ic variants by searching with MAX399. There is a standard Multiplexer or Switches analogue multiplexer here. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY.
MAX399CEE+ Features
4 Channels
Switch Circuit: SP4T
Additional Features: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY
MAX399CEE+ Applications
There are a lot of Maxim Integrated MAX399CEE+ Analog Switches & Multiplexers ICs applications.
- Channel Banks
- PBXs
- DSLAMs
- HDTV
- FTTH
- Signal routing between systems
- Modems
- Cellular phones
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Fault Tolerant Systems
