MAX399CPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX399 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 19.175mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
MAX399CPE Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SP4T switching circuits. A total of 2 circuits make up this switch device. Using the MAX399 search parameter, you can discover variants of the switch. This digital multiplexer has 100Ohm internal resistance. The datasheets for the 16 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 15V. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 3V should be applied to the electronic component. This digital switch can be operated with a current of 1μA. Despite this switch's dual supply capability, its voltage should not exceed 8V. It is recommended that you attach at least 3V to your dual power supply. Operating voltages range from 12V. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY.
MAX399CPE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
Additional Features: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY
MAX399CPE Applications
There are a lot of Maxim Integrated MAX399CPE Analog Switches & Multiplexers ICs applications.
- Power routing
- Transmit
- Switching Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio and video signal routing
- Remote wireless modules
- Frame Relay Equipment
- USB 1.1 signal switching circuits
- Microprocessor controlled systems
- Multiplexers
