MAX399CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX399 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-8/3/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
MAX399CPE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 4:1. The operating temperature is extended to around 0°C~70°C TA. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. With a 5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. Unlike digital switches, these are based on SP4T switching circuits. A 2 circuit is present in this switch device. Try searching with MAX399 to find analog multiplexer variants. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Additional features of the electronic component include: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY.
MAX399CPE+ Features
4 Channels
Switch Circuit: SP4T
Additional Features: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY
MAX399CPE+ Applications
There are a lot of Maxim Integrated MAX399CPE+ Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Transmit
- Video switching
- Precision instrumentation
- ATM
- Avionics and Military Systems
- Battery Powered Systems
- Low-Voltage
- Fault Tolerant Systems
- Routers
