MAX399CSE

150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX399 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX399CSE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 967
Description: 150ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX399 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	2
Supply Voltage	5V
Base Part Number	MAX399
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	15V
Min Supply Voltage	3V
Operating Supply Current	1μA
Propagation Delay	150 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	3V~15V ±3V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	400 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF 20pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	6 Ω (Max)
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX399CSE Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component of this type can be found in the 16 series. Based on SP4T switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. Search with MAX399 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 15V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 3V should be applied to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. For this switch, a dual supply voltage is feasible, but it must not exceed 8VFor dual power supplies, a voltage of at least 3V should be attached. There is a voltage range of 12V operating voltages for the electrical part. Don't forget the additional features of this electronic part, such as: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY.