MAX399EEE+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX399 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-8/3/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.75mm |
| Length | 4.89mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX399EEE+T Overview
The electrical component comes in 16-SSOP (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operating temperature extended to -40°C~85°C TA. In total, 16 terminations have occurred. As a result of its 4 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used to build these analog multiplexers. A 2 circuit is present in this switch device. Using the MAX399 search parameter, you can discover variants of the switch. Theswitch device is a typical Multiplexer or Switches. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.
MAX399EEE+T Features
4 Channels
Switch Circuit: SP4T
MAX399EEE+T Applications
There are a lot of Maxim Integrated MAX399EEE+T Analog Switches & Multiplexers ICs applications.
- Communication systems
- Mechanical reed relay replacement
- Remote wireless modules
- Audio and video signal routing
- Ultrasound
- Cross Connects
- Intelligent PBX
- Industrial
- Signal routing between systems
- Microprocessor controlled systems
