MAX399EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX399 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-8/3/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
MAX399EPE+ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 16 pins. SP4T switching circuits are used in these analog switch ics. A 2 circuit is present in this switch device. Use MAX399 to search for variants of the digital switches. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Additional features include: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY.
MAX399EPE+ Features
4 Channels
Switch Circuit: SP4T
Additional Features: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY
MAX399EPE+ Applications
There are a lot of Maxim Integrated MAX399EPE+ Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Data switching
- Industrial control systems
- SDH
- Data Acquisition Systems
- Battery-powered systems
- Cross Connects
- PDH Multiplexers
- E1 Network Equipment
- Signal routing between systems
