MAX399ESE+
| Parameters | |
|---|---|
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX399 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-8/3/15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3V~15V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
MAX399ESE+ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Increasing operating temperature to around -40°C~85°C TA. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. This electronic part can be found in the 16 series. Based on SP4T switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 2. Using the MAX399 search parameter, you can discover variants of the switch. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board.
MAX399ESE+ Features
4 Channels
Switch Circuit: SP4T
MAX399ESE+ Applications
There are a lot of Maxim Integrated MAX399ESE+ Analog Switches & Multiplexers ICs applications.
- Communication systems
- Industrial
- Audio and video signal routing
- Battery Powered Systems
- Imaging
- RGB switches
- Frame Relay Equipment
- Communication systems
- Multiplexers
- Fiber In The Loop (FITL)
