Parameters |
Min Dual Supply Voltage |
3V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
11pF 20pF |
On-state Resistance Match-Nom |
6Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
150ns, 150ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
6 Ω (Max) |
Crosstalk |
-92dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.03A |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
MAX399 |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Number of Circuits |
2 |
Max Supply Voltage |
15V |
Min Supply Voltage |
3V |
Operating Supply Current |
1μA |
Propagation Delay |
150 ns |
Turn On Delay Time |
500 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
3V~15V ±3V~8V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
400 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
100Ohm |
MAX399ESE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. 16 terminations have been made so far. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component of this type can be found in the 16 series. Unlike digital switches, these are based on SP4T switching circuits. A total of 2 circuits make up this switch device. Use MAX399 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 15V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. There should be 3V voltage fed to the electrical part below 3V. This multiplexer would work with 1μA current. Despite this switch device's dual supply capability, its voltage should not exceed 8V. The voltage should be at least 3V if you are using dual power supplies. There is a voltage range of 12V operating voltages for the electrical part. Additional features include: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY.
MAX399ESE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
Additional Features: ALSO OPERATE WITH 3V TO 15V SINGLE SUPPLY
MAX399ESE Applications
There are a lot of Maxim Integrated MAX399ESE Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Video signal routing
- Wireless Local Loop
- Isolation
- Optical Applications
- Audio and video signal routing
- SONET
- Private Branch Exchange (PBX)
- PCMCIA cards
- DVD-R