MAX4038EUA+

13mA per Channel 1pA 50 dB Instrumentational OP Amps 1.4V~3.6V MAX4038 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4038EUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 730
Description: 13mA per Channel 1pA 50 dB Instrumentational OP Amps 1.4V~3.6V MAX4038 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	MAX4038
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3V
Number of Circuits	1
Operating Supply Current	1.9μA
Nominal Supply Current	2.5μA
Max Supply Current	2.5μA
Slew Rate	0.004V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.4V~3.6V
Output Current per Channel	13mA
Input Offset Voltage (Vos)	200μV
Bandwidth	4 kHz
Unity Gain BW-Nom	4 kHz
Voltage Gain	108dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	4V
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Power	NO
Number of Amplifiers	2
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4038EUA+ Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tube case. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 200μV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Operational amplifier can operate supply current at 1.9μA. The voltage gain should stay at 108dB. This op amp contains 1 circuits. On the output type, there are Rail-to-Rail different types of op amps. As a result of this, the buffer amplifier is packed in TAPE AND REEL. On the linear amplifier, there are 2 amplifiers.