MAX4051ACPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX4051 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX4051ACPE+ Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. The operating temperature is extended to around 0°C~70°C TA. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with MAX4051. This digital multiplexer has 100Ohm internal resistance. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 16V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 1μA current. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 2.7V. Operating voltages range from 15V.
MAX4051ACPE+ Features
8 Channels
1μA Supply Current
MAX4051ACPE+ Applications
There are a lot of Maxim Integrated MAX4051ACPE+ Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Fiber In The Loop (FITL)
- Ultrasound
- Intelligent PBX
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Public switching systems
- ISDN NT1/TA
- Sample hold systems
- SONET/SDH ADM
- Medical Instrumentation
