banner_page

MAX4051AEEE

175ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4051 16 Pins 100pA 5V 16-SSOP (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX4051AEEE
  • Package: 16-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 263
  • Description: 175ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4051 16 Pins 100pA 5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SSOP (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2006
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 100Ohm
Max Power Dissipation 640mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number MAX4051
Pin Count 16
Operating Supply Voltage 15V
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 16V
Min Supply Voltage 2V
Operating Supply Current 1μA
Propagation Delay 250 ns
Turn On Delay Time 600 ns
Logic Function Multiplexer
Voltage - Supply, Single/Dual (±) 2V~16V ±2.7V~8V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 300 ns
Max Dual Supply Voltage 8V
On-State Resistance (Max) 100Ohm
Min Dual Supply Voltage 2.7V
High Level Output Current 30mA
Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 90 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 2pF 2pF
On-state Resistance Match-Nom 6Ohm
Switch Time (Ton, Toff) (Max) 175ns, 150ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 6 Ω (Max)
Crosstalk -90dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Height 1.55mm
Length 4.98mm
Width 3.99mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MAX4051AEEE Overview


Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 8 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. Electronic part bodies are injected with 16 pins. A 1 circuit is present in this switch device. Try searching for the analog switch ic with MAX4051 if you are looking for variants. The internal resistance of this digital multiplexer is 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 16V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. 1μA current would be enough for this multiplexer to operate. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 2.7V. It can operate from 15V operating voltages.

MAX4051AEEE Features


8 Channels
1μA Supply Current

MAX4051AEEE Applications


There are a lot of Maxim Integrated MAX4051AEEE Analog Switches & Multiplexers ICs applications.

  • Signal routing between systems
  • Industrial control systems
  • Data Acquisition Systems
  • SDH/SONET multiplexers
  • E1 Network Equipment
  • SONET/SDH ADM
  • Ultrasound
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Microwave transmission systems
  • Fiber In The Loop (FITL)

Write a review

Note: HTML is not translated!
    Bad           Good