MAX4051AEPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4051AEPE Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexer and demultiplexer circuits have a number 8:1. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 8 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. Try searching for MAX4051 variants of the analog switch ic. As far as internal resistance is concerned, it has 100Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
MAX4051AEPE Features
8 Channels
MAX4051AEPE Applications
There are a lot of Maxim Integrated MAX4051AEPE Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Cross Connects
- Battery Powered Instruments
- Medical
- Optical Applications
- FTTH
- ISDN NT1/TA
- Industrial
- Mechanical reed relay replacement
- Audio signal routing
