MAX4051AEPE+
| Parameters | |
|---|---|
| Surface Mount | NO |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | 3/5/+-5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 8 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Off-state Isolation-Nom | 90 dB |
| Neg Supply Voltage-Max (Vsup) | -8V |
| On-state Resistance Match-Nom | 6Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Neg Supply Voltage-Min (Vsup) | -2.7V |
| Height Seated (Max) | 4.572mm |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX4051AEPE+ Overview
In total, there have been 16 terminations. A electrical component with 8 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. 16 pins are injected to the electronic part body. Multiplexer or Switches is a typical switch device. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Additional features of the electronic component include: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY. To power the multiplexer ics, the voltage must be set at 2.7V. note that this multiplexer can malfunction at temperatures above 85°C. It is recommended to set the operating environment over -40°C.
MAX4051AEPE+ Features
8 Channels
Additional Features: IT CAN ALSO WORK ON 2V TO 16V SINGLE SUPPLY
MAX4051AEPE+ Applications
There are a lot of Maxim Integrated MAX4051AEPE+ Analog Switches & Multiplexers ICs applications.
- Communication systems
- Frame Relay Equipment
- Cable Modem
- High reliability control systems
- SDH/SONET multiplexers
- Digital access cross connects
- SONET
- Communication systems
- E1 Multiplexer
- High speed data transmission line cards
