MAX4051AESE

175ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4051 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4051AESE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 225
Description: 175ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4051 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX4051
Pin Count	16
Operating Supply Voltage	15V
Power Supplies	3/5/+-5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	16V
Min Supply Voltage	2V
Operating Supply Current	1μA
Propagation Delay	250 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.7V
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	6Ohm
Switch Time (Ton, Toff) (Max)	175ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	6 Ω (Max)
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4051AESE Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX4051. Analog switches have 100Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 16V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 2V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 1μA current. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 2.7V to your dual power supply. It can operate from 15V operating voltages.