Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Max Power Dissipation |
640mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
MAX4051 |
Pin Count |
16 |
Operating Supply Voltage |
15V |
Power Supplies |
3/5/+-5V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
16V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Throw Configuration |
SP8T |
Propagation Delay |
250 ns |
Turn On Delay Time |
600 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~16V ±2.7V~8V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
300 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
2.7V |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
2pF 2pF |
On-state Resistance Match-Nom |
12Ohm |
Switch Time (Ton, Toff) (Max) |
175ns, 150ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
12 Ω (Max) |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Height |
1.55mm |
Length |
4.98mm |
Width |
3.99mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4051CEE Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operation at a temperature around 0°C~70°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 8 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. Circuits number 1 make up this analogue multiplexer. Using the MAX4051 search parameter, you can discover variants of the switch. It has an internal resistance of 100Ohm. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 16V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2V. This multiplexer would work with 1μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. The voltage should be at least 2.7V if you are using dual power supplies. Operating voltages range from 15V.
MAX4051CEE Features
8 Channels
1μA Supply Current
MAX4051CEE Applications
There are a lot of Maxim Integrated MAX4051CEE Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Optical Applications
- Sample-and-hold systems
- Medical systems
- Communication systems
- Precision test equipment
- Access Concentrators
- Wireless Local Loop
- Frame Relay Equipment
- Intelligent PBX