MAX4051CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Power Supplies | 3/5/+-5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| Min Dual Supply Voltage | 2.7V |
| Off-state Isolation-Nom | 90 dB |
| On-state Resistance Match-Nom | 12Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4051CPE+ Overview
Shipping overseas is convenient with the electronic component packed in DIP. High reliability is achieved by using advanced packaging method Tube. 16 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. An injection of 16 pins is performed into the body of the electrical component. Analog switches have 100Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. Users shouldn't supply more than 16V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. 1μA current would be enough for this multiplexer to operate. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. The voltage should be at least 2.7V if you are using dual power supplies. A voltage of 15V can be used to operate the electronic component. A temperature above 70°C is not suitable for operation of the analogue multiplexer.
MAX4051CPE+ Features
1 Channels
1μA Supply Current
MAX4051CPE+ Applications
There are a lot of Maxim Integrated MAX4051CPE+ Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Industrial control systems
- Medical systems
- Digital access cross connects
- PDH Multiplexers
- Precision instrumentation
- SONET/SDH ADM
- Private Branch Exchange (PBX)
- HDTV
- PCMCIA cards
