banner_page

MAX4051EEE

175ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4051 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX4051EEE
  • Package: 16-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 712
  • Description: 175ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4051 16 Pins 1nA 5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SSOP (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2006
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 100Ohm
Max Power Dissipation 640mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number MAX4051
Pin Count 16
Operating Supply Voltage 15V
Power Supplies 3/5/+-5V
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 16V
Min Supply Voltage 2V
Operating Supply Current 1μA
Throw Configuration SP8T
Propagation Delay 250 ns
Turn On Delay Time 600 ns
Logic Function Multiplexer
Voltage - Supply, Single/Dual (±) 2V~16V ±2.7V~8V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 300 ns
Max Dual Supply Voltage 8V
On-State Resistance (Max) 100Ohm
Min Dual Supply Voltage 2.7V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 90 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 2pF 2pF
On-state Resistance Match-Nom 12Ohm
Switch Time (Ton, Toff) (Max) 175ns, 150ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 12 Ω (Max)
Crosstalk -90dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Height 1.55mm
Length 4.98mm
Width 3.99mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MAX4051EEE Overview


The electrical component comes in 16-SSOP (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 8:1. Operation at a temperature around -40°C~85°C TA. In total, there are 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4051. In this multiplexer, the internal resistance is 100Ohm. Please refer to the datasheets for 16 pins functions. Multiplexers should not be powered above 16V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 1μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 8V. You should attach at least 2.7V voltage if you are using dual power supply. It can operate from 15V operating voltages.

MAX4051EEE Features


8 Channels
1μA Supply Current

MAX4051EEE Applications


There are a lot of Maxim Integrated MAX4051EEE Analog Switches & Multiplexers ICs applications.

  • DSUs
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Fault Tolerant Systems
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Audio/video switches
  • Data switching
  • MP3 players
  • New designs requiring multiplexer functions
  • SDH/SONET multiplexers
  • RGB switches

Write a review

Note: HTML is not translated!
    Bad           Good