MAX4051EPE+

175ns, 150ns 100Ohm Analog Switches MAX4051 16 Pins 1nA 5V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4051EPE+
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 158
Description: 175ns, 150ns 100Ohm Analog Switches MAX4051 16 Pins 1nA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX4051
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	16V
Min Supply Voltage	2V
Operating Supply Current	1μA
Throw Configuration	SP8T
Propagation Delay	250 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	12Ohm
Switch Time (Ton, Toff) (Max)	175ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	12 Ω (Max)
Crosstalk	-90dB @ 100kHz
Height Seated (Max)	4.572mm
Width	7.62mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

MAX4051EPE+ Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Through Hole. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. The circuits in this analogue multiplexer number 1. Try searching with MAX4051 to find analog multiplexer variants. As far as internal resistance is concerned, it has 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. Multiplexers should not be powered above 16V in normal situations. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 2V. For this multiplexer to operate, 1μA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. A dual power supply should have at least 2.7V voltage attached. It can operate from 15V operating voltages.