MAX4051EPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 12 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4051EPE Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 16 terminations. A 8 channel electronic part produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. The multiplexer consists of 1 circuits. MAX4051 can be used to search for analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board.
MAX4051EPE Features
8 Channels
MAX4051EPE Applications
There are a lot of Maxim Integrated MAX4051EPE Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Automatic test equipment
- HDTV
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- ISDN NT1/TA
- Sample hold systems
- Wireless Local Loop
- USB 1.1 signal switching circuits
- Precision data acquisition
- PBXs
