MAX4052ACPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4052 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4052ACPE Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Through Hole. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SP4T switching circuit are built. The circuits in this analogue multiplexer number 2. Try searching with MAX4052 to find analog multiplexer variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
MAX4052ACPE Features
8 Channels
Switch Circuit: SP4T
MAX4052ACPE Applications
There are a lot of Maxim Integrated MAX4052ACPE Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Transmit
- Video signal routing
- Precision instrumentation
- Microprocessor Controlled Analog Systems
- SONET
- Battery-powered systems
- Channelized and Unchannelized DS3 applications
- Private Branch Exchange (PBX)
- Channel Banks
