MAX4052ACPE+

175ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4052 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4052ACPE+
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 277
Description: 175ns, 150ns SP4T 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX4052 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Number of Circuits	2
Max Supply Voltage	16V
Min Supply Voltage	2V
Operating Supply Current	1μA
Propagation Delay	250 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2V~16V ±2.7V~8V
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.01mA
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 2pF
On-state Resistance Match-Nom	6Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	175ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	6 Ω (Max)
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	175ns
Switch-off Time-Max	150ns
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX4052
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	8

MAX4052ACPE+ Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. In total, 16 terminations have occurred. A 8 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. A SP4T switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Using the MAX4052 search parameter, you can discover variants of the switch. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. Please refer to the datasheets for 16 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 2V. The analogue multiplexer could operate on 1μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. In the case of dual power supplies, you should connect at least 2.7V. The electrical part can be operated at 15V voltage levels.