MAX4052AEEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX4052 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4052AEEE+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SSOP (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. A 2 circuit is present in this switch device. MAX4052 can be used to search for analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. normally, users should not supply switches with voltages higher than 16V. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2V. The switch device would be able to operate with 1μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. A dual power supply should have at least 2.7V voltage attached. This electrical part is compatible with 15V operating voltages.
MAX4052AEEE+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4052AEEE+T Applications
There are a lot of Maxim Integrated MAX4052AEEE+T Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Ultrasound
- Video signal routing
- Digital access cross connects
- Medical Instrumentation
- Multi-Line E1 Interface Cards
- PCMCIA cards
- Transmit
- Avionics
- Signal routing between systems
