MAX4052AEPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4052 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4052AEPE Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Through Hole. 4:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. Due to its 8 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. The analog switch ics are built using SP4T switching circuits. It consists of 2 circuits. Try searching for the analog switch ic with MAX4052 if you are looking for variants. As far as internal resistance is concerned, it has 100Ohm. In this analog multiplexer, the value is Multiplexer or Switches. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
MAX4052AEPE Features
8 Channels
Switch Circuit: SP4T
MAX4052AEPE Applications
There are a lot of Maxim Integrated MAX4052AEPE Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Sample-and-hold systems
- Mechanical reed relay replacement
- Medical systems
- Remote wireless modules
- SDH
- Digital Cross-Connects
- Communication systems
- Industrial and process control systems
- Audio and video routing
