MAX4052CEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX4052 |
| Pin Count | 16 |
| Operating Supply Voltage | 8V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 225 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 12 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
MAX4052CEE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Operational temperature extended around 0°C~70°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. Multiplexers built on a SP4T switching circuit are built. A total of 2 circuits make up this switch device. Look for analog switch ic variants by searching with MAX4052. Analog switches have 100Ohm internal resistance. The datasheets for the 16 pins explain the functions. Users shouldn't supply more than 16V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 2V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. When using dual power supplies, you should attach at least 2.7V. It can operate from 8V operating voltages.
MAX4052CEE+ Features
1 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4052CEE+ Applications
There are a lot of Maxim Integrated MAX4052CEE+ Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Relay replacements
- PDH Multiplexers
- Low-Voltage
- Signal routing between systems
- Access Concentrators
- E1 Multiplexer
- Residential Gateways, Home Gateway/Router
- Data Acquisition Systems
- Audio/video switches
