MAX4052CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX4052 |
| Pin Count | 16 |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 12 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4052CPE Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. In Through Hole, you'll find this switch device. There is 4:1 ratio between the number of multiplexers and demultiplexers. Temperatures around 0°C~70°C TA are extended for operation. In total, there have been 16 terminations. A electrical component with 8 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component like this is included in the 16 series. These analog multiplexers are built based on SP4T switching circuits. A total of 2 circuits make up this switch device. MAX4052 can be used to search for analog multiplexer variants. Analog switches have 100Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 16V to the switch device in normal circumstances. 2V is the lowest voltage the electrical component should receive. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. In the case of dual power supplies, you should connect at least 2.7V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
MAX4052CPE Features
8 Channels
Switch Circuit: SP4T
MAX4052CPE Applications
There are a lot of Maxim Integrated MAX4052CPE Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Frame Relay Equipment
- Routers
- Industrial and process control systems
- Precision instrumentation
- Medical
- SDH
- Audio/video switches
- Cross Connects
- Microprocessor controlled systems
