MAX4052EPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 12 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4052EPE Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component like this is included in the 16 series. A SP4T switching circuit is used for these analog switches. The multiplexer consists of 2 circuits. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.
MAX4052EPE Features
8 Channels
Switch Circuit: SP4T
MAX4052EPE Applications
There are a lot of Rochester Electronics, LLC MAX4052EPE Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Power routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- Medical Instrumentation
- E1 Multiplexer
- Avionics
- Microprocessor Controlled Analog Systems
- Switching Systems
- Channel Banks
- Microprocessor controlled systems
