MAX4052EPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4052 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 12 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4052EPE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a number of circuits 4:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. A 8 channel electronic part produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. The electrical component body receives 16 pins. A SP4T switching circuit is used for these analog switches. There are 2 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MAX4052. Analog switches have 100Ohm internal resistance. In this analog multiplexer, the value is Multiplexer or Switches. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
MAX4052EPE Features
8 Channels
Switch Circuit: SP4T
MAX4052EPE Applications
There are a lot of Maxim Integrated MAX4052EPE Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Avionics
- Frame Relay Equipment
- Residential Gateways, Home Gateway/Router
- Microprocessor controlled systems
- USB 1.1 signal switching circuits
- Precision test equipment
- MP3 players
- RGB switches
- Sample hold systems
