MAX4052ESE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4052 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±2.7V~8V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.01mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 12 Ω (Max) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4052ESE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 16 series. Based on SP4T switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. If you are looking for variants of the digital switch, trying search with MAX4052. The internal resistance of this digital multiplexer is 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A voltage higher than 16V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. A low voltage of 2V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 2.7V. It can operate from 15V operating voltages.
MAX4052ESE Features
8 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4052ESE Applications
There are a lot of Maxim Integrated MAX4052ESE Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Private Branch Exchange (PBX)
- Audio/video switches
- Audio and video signal routing
- Automatic test equipment
- Voice over IP/DSL – Integrated Access Devices, Smart
- New designs requiring multiplexer functions
- Residential Gateways, Home Gateway/Router
- SONET
- Channel Banks
